ProLink PL‑MC‑SM — SM Fiber Media Converter, 10/100 Fast Ethernet
The ProLink PL‑MC‑SM is a 10/100 Mbps fast Ethernet media converter that bridges copper RJ‑45 networks with single‑mode fiber optics — offering auto‑negotiation, link fault pass‑through, and standalone or chassis mounting for enterprise, campus, or telecom optical links.
Description
ProLink PL‑MC‑SM — Single‑Mode Fiber Media Converter 10/100 Base‑T to 100 Base‑FX
Key Features:
-
10/100 Mbps Copper to 100 Mbps Fiber — Converts a copper Ethernet link to a single‑mode fiber link at Fast Ethernet speeds (10/100 Mbps).
-
Auto‑Negotiation & Auto MDI/MDI‑X — Automatically detects speed and crossover settings on the copper port for simple plug‑and‑play operation.
-
Link Fault Pass‑Through (LFP) — Helps propagate link failure status between copper and fiber sides to aid remote troubleshooting.
-
Far End Fault (FEF) — Detects and signals faults from the far fiber end to help with diagnostics.
-
Standalone or Chassis‑Mounted — Can be used as a standalone unit or installed in a ProLink MCC‑14R media converter chassis for rack installations.
-
Optional DIN Rail Mounting — Supports convenient industrial mounting where needed.
-
Low Power Consumption — Efficient operation suitable for continuous use in closets and equipment rooms.
Technical Specifications :
-
Brand: ProLink
-
Model: PL‑MC‑SM
-
Ethernet Port: 10/100 Mbps RJ‑45 (Auto‑Negotiation, Auto MDI/MDI‑X)
-
Fiber Port: 100 Mbps single‑mode (FX) — connector type varies by specific sub‑model (e.g., SC/LC)
-
Operating Modes: Full/Half‑Duplex on copper; Fiber typically full‑duplex
-
Link Fault Pass‑Through & Far End Fault: Yes
-
Mounting: Standalone or ProLink MCC‑14R chassis; optional DIN rail
-
Power: External DC supply (typically +5 VDC)
-
Environmental: Standard indoor operating range (e.g., –5 °C to ~55 °C)
Performance & Connectivity:
-
Extends Network Distance — Converts electrical Ethernet to optical, allowing connection of network segments over longer distances than copper cabling alone can support (up to several kilometers depending on fiber choice and optics).
-
Reliable Fast Ethernet Conversion — Suited for 10 Mbps and 100 Mbps applications such as IP cameras, VoIP, access switches, or remote site links where Gigabit speeds are not required.
-
Easy Integration — Works with standard Ethernet devices on the copper side and fiber optic networks on the FX side without special drivers or configuration.
