Egyptian pound (EGP) - EGP
  • United States dollar ($) - USD
  • Egyptian pound (EGP) - EGP

Huawei USG6000E-S03-AC ,10*GE RJ45+2*10GE SFP+,100 Users,Firewall

SKU: USG6000E-S03

Contact us for pricing on this product:

Request Quote by EmailWhatsApp Us
In Stock
EGP 0.00
In Stock

USG6000E-S03-AC Host(10*GE RJ45+2*10GE SFP+,1*Adapter,Include SSL VPN 100 Users)

Description

USG6000E-S03

Overview

Table 2-1 Basic information about the USG6000E-S03

DescriptionPart NumberModelFirst supported version
USG6000E-S03-AC Host(10*GE RJ45+2*10GE SFP+,1*Adapter,Include SSL VPN 100 Users)02355YXHUSG6000E-S03-ACV600R007C20SPC605

Appearance

Figure 2-1 Appearance of the USG6000E-S03 (front view)

USG6000E-S03 

Figure 2-2 Appearance of the USG6000E-S03 (rear view)

USG6000E-S03 

Components

Figure 2-3 Components of the USG6000E-S03

USG6000E-S03 

1. Indicator area

2. Product model ID

3. Protective ground terminal

4. Fixed interface area

5. MAC label

6. SN label

Table 2-2 Component functions

Name

Description

Indicator area

Provides various indicators to display the device running status in real time.

Product model ID

Indicates the product model of the device.

Protective ground terminal

Connects the M4 OT terminal of a PGND cable to the cabinet or the ground bar in the equipment room.

Fixed interface area

  • Provides clip hole and power receptacle.
  • Provides service ports, USB ports, console ports, and out-of-band management ports for device configuration and maintenance.
  • Houses a Micro SD card to store logs and reports.

MAC label

Uniquely identifies the MAC address of the device, which is required during network forwarding configuration.

SN label

Uniquely identifies the device, which needs to be provided for the local technical support personnel to apply for a license.

Indicators and Buttons

Figure 2-4 Indicators and buttons on the USG6000E-S03

USG6000E-S03 

1. PWR, SYS, USB, CLOUD, and MicroSD indicators

2. GE electrical port ACT indicator

3. GE electrical port LINK indicator

4. Optical port indicator

5. RST button

Table 2-3 Indicators on the USG6000E-S03

SilkscreenNameColorStatusDescription
PWRPower indicatorGreenSteady onThe power module is working properly.
OffThe power module is faulty or the device is not powered on.
SYSSYS indicatorGreenSteady onThe system is being powered on or restarted.
GreenBlinks once every 2 seconds (0.5 Hz).The system is running normally.
GreenBlinking four times every second (4 Hz)The system is starting.
RedSteady onA system fault occurs.
OffThe system is not running.
USBUSB indicatorGreenSteady onUSB-based deployment has been completed.
GreenBlinking four times every second (4 Hz)The system is reading data from the USB flash drive.
RedSteady onUSB-based deployment fails.
OffUSB-based deployment is disabled (default state).
CLOUDCLOUD indicatorGreenSteady onConnected to the cloud management platform.
GreenBlinking four times every second (4 Hz)Connecting to the cloud management platform, transmitting or receiving data.
OffThe device is not connected to the cloud management platform.
MicroSDMicro SD indicatorGreenSteady onThe micro SD card is present.
OffThe micro SD card is not detected.
ACT indicator of the GE electrical portYellowBlinking (12 Hz)The port is sending or receiving data.
OffThe port is not sending or receiving data.
LINK indicator of the GE electrical portsGreenSteady onThe port link is connected.
OffNo link is established on the port.
Optical port indicatorGreenSteady onThe port link is connected.
GreenBlinking (12 Hz)The port is sending or receiving data.
OffNo link is established on the port.
Table 2-4 Buttons on the USG6000E-S03

SilkscreenNameDescription
RSTRST button

When the device is running properly, you can press the RST button to restart the device. You are advised to save the current configuration before pressing the RST button.

This button can also be used to restore the default settings with one click. If you press and hold the RST button for 5 seconds and then release the RST button, the device restores its default settings and restarts.

NOTE:

If needed, you can run the factory-configuration prohibit command in the system view to disable the function of restoring the factory settings by holdi

نظرًا لاختلاف الأسعار وتأثيرات الشحن، يُرجى التأكد من الأسعار الحالية قبل تقديم أي طلب شراء لضمان دقة الفاتورة وتفادي أي تأخيرات

لضمان توفر المنتج، يرجى التواصل معنا قبل إتمام عملية الشراء

No products in the cart.

Log in

You dont have an account yet? Register Now